Q46/84 Hydrogen Peroxide Monitor

Dissolved Fluoride Monitor for drinking water and other clean water applications. This monitor conditions the sample for stable measurement and provides automatic calibration using two fluoride standards.

General Details

Hydrogen peroxide (H2O2) is an extremely strong oxidizer widely used in bleaching applications in the paper industry. It has also been used in a variety of applications including disinfection, odor control, oxygenation, and cyanide oxidation. It is frequently used in wastewater collection systems to remove hydrogen sulfide that destroys concrete pipes and manhole structures. Peroxide applications in aqueous systems, like most chemical treatment processes, function most efficiently with accurate measurement and control.

ATI’s Model Q46/84 Hydrogen Peroxide Water Quality Monitor is designed to continuously measure the concentration of H2O2 in aqueous systems. Using a direct peroxide sensor, the unit responds rapidly to changes in concentration, enabling operators to control chemical feed to maintain specific targets. With both digital and analog communications available, the Q46 is adaptable to a wide variety of peroxide monitoring applications.

APPLICATIONS

Cooling Water, Aquarium, Food & Beverage, Potable Water Treatment & Odor Control.

SENSOR OPERATION

Hydrogen Peroxide sensors are amperimetric devices isolated from the water by a peroxide permeable membrane. As peroxide diffuses through this membrane, it comes in contact with an active electrode and is oxidized on the surface. The net effect is that the sensor generates a current proportional to H2O2 concentration.  An integral RTD in the sensor provides for automatic temperature compensation, allowing the sensor to operate accurately over a range of 0-50°C.

Peroxide sensors are capable of operating over a fairly broad concentration range, from a low range of 0-2 PPM up to a high range of 0-200 PPM. Systems will operate with good sensitivity down to 0.05 PPM and respond to changes in concentration within about 60 seconds, making them useful for automatic control.

FLOW OPTIONS

Hydrogen Peroxide sensors require a steady flow of sample across the membrane at the tip of the sensing assembly.  ATI offers options for flowcells, including the standard constant-head overflow system, and a sealed flowcell for pressures up to 50 PSI. For simplicity of installation, complete flow control assemblies are available. Panel assemblies are available with or without a flow switch and can greatly reduce installation time.

PAA_Sensor

Ominaisuudet

Flexibility
Programmable range options from 0-2 PPM up to 0-200 PPM provide maximum application flexibility.

AC or DC Power Options
Power options include universal 90-260 VAC or 12-24 VDC.

Analog Output Options
Two isolated 4-20 mA outputs are standard, with an option for a third output if required. Default setting provides analog outputs for H2O2 and temperature.

PID Output
Standard PID control function assignable to one analog output.

Digital Communications
Available in either Profibus-DP, Modbus-RTU, Modbus-TCP/IP, or Ethernet-IP.

Relay Outputs
Three SPDT relays are standard, with relay functions programmable for alarm, control, or trouble indication. Three additional low power relays available as an option.

Flexible Mounting
NEMA 4X (IP-66) enclosure is suitable for wall, pipe, or panel mounting.

Clear Display
Back-lit large LCD display provides clear visibility in any lighting conditions. A scrolling second line on the display provides additional information and programming prompts.