1. Home
  2. Tuotteet
  3. Vesimittaukset
  4. Q45D Dissolved Oxygen Transmitter

Q45D Dissolved Oxygen Transmitter

Loop-Powered or Battery-Powered Transmitters

Categories: , , ,
General Details
Dissolved Oxygen Monitoring applications requiring a simple 2-wire transmitter or battery-operated instrument are easily satisfied using ATI’s model Q45D transmitter.  Adaptable to either Optical or Galvanic D.O. sensors, this unit is ideal for installations where only analog signals are needed and low power operation is preferred.  For applications requiring AC operation, relay outputs, automatic sensor cleaning, or digital communication, refer to ATI’s model Q46D brochure.
ATI’s optical element is designed to last a minimum of 2-years in normal operation, but will more often provide a life of 3-5 years, unless mechanical damage occurs. Optical sensors do not require flow across the sensing element so accurate measurements can be made more accurately in systems with low flows. Unlike some optical sensors, this sensor is not degraded by exposure to sunlight.
The Galvanic Dissolved Oxygen sensor uses a rugged 5 mil Teflon membrane to resist mechanical abrasions and tears. The membrane serves as a barrier to allow molecular oxygen to diffuse into the reaction cell where it is reduced, producing a small current which is proportional to oxygen concentration.
Ominaisuudet

Adaptability
Concentration version for direct display of chemical concentrations.

Extra Outputs
Expansion board to add a third 4-20 mA analog output or to add three additional non-isolated low power relays.

Flexibility
Wide range capability, with selectable ranges of 0-200.0 uS up to 0-2.000 S provide maximum application flexibility.

AC or DC Power Options
Power options include universal 100-240 VAC +/- 10%, or 12-24 VDC.

Flexibility
Programmable range options from 0-200 PPB up to 0-200 PPM provide maximum application flexibility.

AC or DC Power Options
Power options include universal 90-260 VAC or 12-24 VDC.

Analog Output Options
Two isolated 4-20 mA outputs are standard, with an option for a third output if required. Default setting provides analog outputs for conductivity and temperature.

PID Output
Standard PID control function assignable to one analog output.

Digital Communications
Available in either Profibus-DP, Modbus-RTU or Ethernet-IP.

Relay Assignable
Three SPDT relays are standard, with relay functions programmable for alarm, control, or trouble indication. Three additional low power relays available as an option.

Flexible Mounting
NEMA 4X (IP-66) enclosure is suitable for wall, pipe, or panel mounting.

Clear Display
Back-lit large LCD display provides clear visibility in any lighting conditions. A scrolling second line on the display provides additional information and programming prompts.

Documents
Tuotetiedustelu

    Osoite
    Malminkartanonkuja 4
    00390 Helsinki
    Finland

    Puh. +358 (0) 20 7981040
    Email: finland@norskanalyse.com