New generation of inline carbonation for wine refreshing
- General Details
- Product Details
- Technical Data
Effective adjustment of the carbonation level (carbonation for white and rose wines, or CO2 reduction for red wines) is an important process step in the adjustment & production of the optimal wine quality.
Quality improvement in white and rosé wines
The unique incorporation of fine carbon dioxide bubbles lends freshness and lightness to the flavour and body of wines. Even with dense and voluminous wines, it imparts aromas. The subtle carbon dioxide bubbles make white and rosé wines fresher, livelier and aromatic.
De-carbonation and CO2 adjustment in red wines
Excess and disturbing carbon dioxide can be removed from red wines. Instead of charging with carbon dioxide, plain nitrogen is used. The new designed ICS 210 carbonator makes it easy to adjust the optimal content of carbon dioxide in wines. The wine is simply passed through the system and conveyed unpressurized into the tank.
The device works purely pneumatically and doesn’t need any electric energy supply. The desired carbon dioxide concentration is set directly at the device itself. If the product flow drops below a minimum flow rate, the device is automatically deactivated. When the product flow increases, carbonation is activated again.
A feed pump (not included) presses the beverage through a built-in Venturi injector, where the desired amount of CO2 is added. The CO2 bubbles dissolve in the downstream mixing stage.
|Measurement Categories||Concentration of carbonic acid|
|Objects||Softdrinks, beer, wine & cider|
|Specifics||Compact construction, low maintenance request, adjustable, mobile application|
|Automation Level||Fully Automatic Machine|
- Quick return of investment
- Low maintenance requirements
- Easy exchangeable service module on board
- Accuracy and consistency of product quality
- Easy installation and operation
- Wide range of flow rates covered with one system
- High efficiency
- CIP compatible
- Flow rate: 700 – 12.500 l/h
(depending on injector size) (185 – 3302 gal/h)
- CO2 concentration: 0-1.8 g/l / 0-0.9 vol
(continuously variable, temperature-dependent)
- Required feed pump pressure: > 2 bar / 29 PSI
- Maximum operating pressure: 6 bar / 87 PSI
- CO2 supply pressure: 7 bar / 102 PSI
- Dimensions (LxHxD) in mm: 270 x 190 x 160
inch: 10.6 x 7.5 x 6.3
- Pressure loss: approx. 0.7–2.0 bar
(10 – 29 psi)